top of page

Why Fasteners are the backbone of your Pre Engineered Building?

Here is all you need to know to ensure the fasteners used in your Pre Engineered building are of optimum quality.

PEB customers often do not pay attention to the fasteners to be used in their building, selection of the wrong fasteners can shake the skeleton of your PEB structure. Fasteners, such as bolts, screws and nuts, are the unsung heroes that keep the entire structure together.

What are fasteners?

Fasteners are the connectors that join various steel components in a PEB, including columns, rafters, purlins, and wall panels. They play a pivotal role in bearing the loads, resisting external forces, and ensuring the stability of the structure. Therefore, the quality of fasteners is paramount in guaranteeing the structural performance of PEBs.

Types of Fasteners

Bolts: Bolts are threaded fasteners with a head, used to join two or more components together.

Nuts: Nuts are paired with bolts and provide the necessary clamping force to hold components in place.

Screws: Screws are threaded fasteners with a pointed end, typically used for securing materials together, often without the need for a pre-drilled hole.

Rivets: Rivets are permanent fasteners that are inserted through holes and then "popped" or bucked on the opposite side to create a secure connection.

Washers: Washers are used to distribute the load of a fastener over a larger surface area to prevent damage or deformation.

Anchors: Anchors are used to secure fasteners to materials like concrete or masonry when traditional screws or bolts won't suffice.

Clips and Clamps: These fasteners are designed to hold objects together or provide a clamping force, often used in securing roofing and siding.

Studs: Studs are long bolts without a head, threaded on both ends, and are used to join materials together.

Cleats: Cleats are fasteners that help secure one component to another, often used in joining structural members in PEBs.

Sleeve Anchors: These anchors expand when tightened and are used to secure heavy loads into concrete or masonry.

Toggle Bolts: Toggle bolts are used to anchor heavy objects to walls and ceilings by expanding behind the surface.

Why Quality Assurance Matters

Safety First: Fasteners are responsible for holding the entire structure together. Inadequate or substandard fasteners can compromise the safety of the building, putting occupants and assets at risk.

Longevity: PEBs are designed to last for decades. Quality fasteners are less prone to corrosion and wear, ensuring the structure's durability over time.

Cost-Effective Maintenance: High-quality fasteners require less maintenance and replacement, leading to cost savings in the long run.

Structural Performance: Properly tested and certified fasteners contribute to the overall structural integrity, ensuring that the PEB can withstand various loads and environmental conditions.

Be sure of the following factors:

  • Is the Material right?

Material Familiarize yourself with the specific requirements before selecting a fastener. Fasteners are available in various materials, and opting for best quality fasteners is recommended to ensure corrosion resistance.

  • Understand Head Shapes as per the requirement

Understanding the required head type is essential. Examples include flat head, truss head, and pan head, each serving a distinct purpose.

  • Length of the fasteners must be accurate

Length The length of the fastener is a critical factor that depends on the source and purpose. Sizes vary based on specific needs.

  • Is the costing of the fasteners proper?

Coatings are applied to enhance corrosion resistance. The most common coating types include zinc, hot-dip galvanizing, and chrome.

Fastener Brand that we use at PEB360 Solutions is BDN Fasteners

Fasteners may be small components in the grand scheme of a Pre Engineered Building, but their significance cannot be overstated. They are the linchpin that holds the entire structure together. Ensuring fasteners quality assurance is an investment in safety, longevity, and the overall performance of PEBs. When selecting a partner for your PEB project, always prioritize quality assurance in fasteners to guarantee the reliability of your structure.

60 views0 comments


bottom of page